
Hot Insulation
Steam lines, boilers, vessels and ducting held at temperature and finished in metal cladding.
Read more
Fibre-oriented stone wool for large curved surfaces
Lamella is stone wool cut into strips and turned so the fibres stand at right angles to the surface, then bonded to a facing, usually reinforced aluminium foil. That fibre direction gives it high compressive strength for its weight, and it bends around large pipes, vessels and ducts without gaps opening up. We supply lamella mats, batts and boards from the brands we stock.
Ex-stock at Ahmedabad and Morbi. The datasheet and test certificates come with every dispatch.
4 common applications. Not sure it suits your duty? Ask us and we will tell you.

Typical values for the grades we usually supply. Confirm the offered grade before you order.
| Property | Value |
|---|---|
| Material | Stone wool (rock wool) lamella strips |
| Form | Lamella mat, batt or board |
| Facing | Reinforced aluminium foil (other facings on request) |
| Thickness | Typically 20 - 100 mm |
| Width | Typically 1 m |
| Fire behaviour | Stone wool core is non-combustible |
| Service temperature | Limited by the facing and adhesive on the cold face; the wool itself takes much higher temperatures |
| Note | Typical values. Confirm the offered grade and datasheet before you order. |
5 reasons it earns its place on site.
We supply Rock Wool Lamella on its own, or fit it as part of these services with our own crews.

Steam lines, boilers, vessels and ducting held at temperature and finished in metal cladding.
Read more

Heat loss and heat gain controlled on tanks, equipment and buildings, specified by operating temperature.
Read moreThe datasheet you are quoted against is the material that arrives on site.




The ones we get most about Rock Wool Lamella. Anything else? Ask on WhatsApp and an estimator will reply.
Service temperature: Limited by the facing and adhesive on the cold face; the wool itself takes much higher temperatures, for the usual grades. Tell us your operating temperature and we will confirm the right grade before we quote.
Thickness: Typically 20 - 100 mm; Width: Typically 1 m. If you need a size that is not listed, ask us and we will check what the manufacturer can make.
Typical uses: large diameter pipes and ducts; vessels and storage tanks; HVAC ducts and air handling units; curved and flat surfaces where a mattress would sag.
Yes. We supply it on its own, or our own crews install it as part of our hot insulation, HVAC insulation and thermal insulation work. That starts with a site visit and a written specification, and ends with a joint measurement at handover.
We supply Rock Wool Lamella from our Ahmedabad and Morbi stockyards. Ask us for the manufacturer datasheet for the exact grade we quote. Send your enquiry before 4 pm and you will usually hear back the same working day.

Get it to us before 4 pm and you will usually hear back the same working day.
clients so far, from refineries and power plants to pharma and textile units




























